Performance Test

Accuver is a leading provider of wireless test and measurement solutions that optimise the performance and reliability of mobile networks. We measure, troubleshoot and optimise network performance and wireless service delivery including both voice and data carried by LTE, HSPA, WCDMA, CDMA, GSM and WiMAX technologies. Accuver solutions cover driving testing, post processing, benchmark testing, in-building testing, remote monitoring, audio & video MOS testing and traffic generation etc.

Performance_Accuver03  Performance_Accuver01   Performance_Accuver02

EMITE E400 series multiple-cavity mode-stirred reverberation chamber (MSRC) is the first of its kind to offer fully-automated fast and simple up to 8x8 MIMO OTA testing for LTE, LTE-A, WiMAX, HSPA+ and IEEE802.11n/ac systems. The E400 Series provides the unique passive measurement capabilities of Efficiency, Correlation, Mutual Coupling, MIMO Capacity, Diversity Gain, loss effects, Mean Effective Gain , Effective MEG, and Branch Power Ratio plus active MIMO Over-The-Air (OTA) 3GPP/CTIA Figures of Merit for 2G, 3G and 4G systems including Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), MIMO Throughput (TPUT), Channel Quality Indicator (CQI), MIMO TIS and MIMO TRP, as well as time-domain measurements like DL and UL TCP and UDP Throughput, RMS Delay Spread (RMS DS) and Power Delay Profile (PDP) for a wide variety of Rayleigh, Rician, Nakagami-m, Log-normal, IEEE 802.11n, isotropic, non-isotropic, NIST Indoor-Urban, Extended Pedestrian A (EPA), SCME Urban-Macro (UMA), SCME Urban-Micro (UMI) and other fading environments, all united in one single and intuitive interface.

Emite_1   Emite_3     Emite_4

Candela provides wireless traffic generator for testing Access Points and other WiFi networks, including 802.11u, HotSpot2.0 and 802.11r. The CT52x series use a modified Wireless driver for WiFi NICs based on the Atheros chipset. It can support up to 600 Virtual Stations. Each of the Virtual Stations has its own IP address, IP port space, MAC address and routing table. The Virtual Stations can be assigned to communicate to a particular Access Point, use a particular SSID, and have a WEP (64 or 128bit) or WPA/WPA2 key assigned. More advanced 802.1X authentication is also included. There is a single WiFi radio per CT52x system but multiple CT52x systems can be clustered together for more realistic radio interference patterns and increased traffic generation capability. The radio supports 802.11 a, b, g, n or ac mode. Transmit power and channel/frequency is configured on a per-radio basis. Most other settings are configurable per virtual station.

Candela_1    Candela_3   Candela_4

octoScope provides wireless test solutions and services for  Wi-Fi, LTE, IoT and other wireless markets.

  • Founded in 2006 as a wireless technology consulting company
  • Transitioned to product revenue in 2013
  • Now offering test solutions for Wi-Fi, 4G, 5G, IoT (Bluetooth, Nest), wireless broadband, connected car, medical devices, robotics, public safety, military

octoScope wireless testbed is compact, modular, completely isolated and controllable:

  • Automated, repeatable and accurate metrics of wireless performance & behavior
  • Patented novel technology for emulating real-life RF environment
  • Wireless performance, coexistence, behavior testing in controlled RF environment

octoscope    octoscope-1

XENA develops affordable, easy-to-use, and flexible Ethernet test solutions. We focus exclusively on L2-L3 gigabit Ethernet networking technology and analysis products that deliver demonstrable price/ performance leadership. We have reduced the cost and complexity of GigE testing, enabling you to quickly and cost-effectively add large numbers of 1, 10, 40 and 100 GigE test ports to your test infrastructure.  The XENA test platform provides an open environment where L2-3 traffic can be generated and performance analyzed at wire speed. Our user-friendly XenaManager software is provided for test execution and remote management of test equipment located in multiple locations. In addition, a simple and easy to use TCP/IP command line interface lets users automate testing from any scripting environment. The XENA Ethernet Test Infrastructure platform provides a suite of test modules with copper and optical interface speeds of 10/100/1000 Mbps, 10 Gbps, 40 Gbps, and 100 Gbps. Two chassis product series are available, the compact and transportable XenaCompact and the scalable high-density XenaBay series.

Xena        Xena02            Xena03

PRISMA testing solution performs load and stress testing on NodeB/eNodeB by simulating thousands of UEs with different types of traffic and QoS.  The MsSIM, 3GSIM and UeSIM family products are able to test radio interfaces with different standards, using a common hardware and modular software architecture.  It is a complete solution for all your wireless network testing needs including LTE, HSPA, UMTS and GSM.  It allows full load of multiple cells or wireless networks with single test system.  Hundreds of simulated mobiles can concurrently generate load over the radio interfaces.  Load and stress and functional testing over the radio interface encompass complete wireless network protocol stacks and their applications.  The systems can also simulate channel emulation, spatial and power distributions as well as support intra/inter and iRAT handover testing.

Prisma_4                  prisma_5

Polystar T&M offers Solvers which is load generation, stress and feature testing for SIP, PSTN, 2G, 2.5G, 3G, and 4G telecommunications networks. Solver is a high-performance load, stress, and feature test tool for SIP, PSTN, 2G, 2.5G, 3G, and 4G telecommunications networks. It provides the ability to simulate a Radio Access Network (RAN/UTRAN/E-UTRAN) for GSM/GPRS, UMTS and LTE with a huge number of connected mobile subscribers providing load to the Core Network. You can do this, with Polystar's load and stress testing solution that simplifies qualitative performance analysis for equipment manufacturers, network operators and enterprises.